Skip to content 
Romy – accessible PVC beach changing room
Romy is an accessible beach cabin that allows everyone to change out of sight. It is equipped with a mirror, a seat and coat hooks. TRomy beach cabin is a practical, economical and removable solution accessible to all. It complies with beach accessibility criteria.
It can easily be dismantled at the end of the summer season, in accordance with the coastal law.
The changing room is supplied with the base and its specific anchoring accessories. It can be installed on sand or other soft ground using a wooden or concrete base.
- Made in Italy
- Easy installation and removal (1-2 people)
- Exterior locking / vandal-proof guaranteed
- In accordance with coastal development legislation
- Resistant to marine environment: salt, strong winds and UV
- Low-maintenance
- Guaranteed privacy: ideal for people with reduced mobility to change clothes
- Accessible to all: interior grab bar, dimensions adapted to people with reduced mobility
- Warranty: 5 years on materials. It covers possible cabin deformations
Materials:
- Walls and roofs: profiled and extruded PVC. Assembled and reinforced with wood or aluminum to hold the hinge or accessories.
- Screws: 8 mm wide fischer
- Floor fixing: L-flange
- Locks: double jet (stainless steel-brass latch)
- Handle: white resin, undue key
Interior dimensions:
- Width: 180 cm
- Depth: 180 cm
- Height under roof: 245 cm / external height: 250 cm
Exterior dimensions:
- 188 cm x 188 cm
- Height: 250 cm
Door:
- 180 cm x 90 cm with louver
Interior color: white
Available exterior colors: White, Yellow, Green, Blue, Red, Wood, Gray
- Made in Italy
- Easy installation and removal (1-2 people)
- Exterior locking / vandal-proof guaranteed
- In accordance with coastal development legislation
- Resistant to marine environment: salt, strong winds and UV
- Low-maintenance
- Guaranteed privacy: ideal for people with reduced mobility to change clothes
- Accessible to all: interior grab bar, dimensions adapted to people with reduced mobility
- Warranty: 5 years on materials. It covers possible cabin deformations
All that's missing is you!
Visually appealing
Cost-effective
Accessible to all
Environmentally friendly
Customizable
Installation and maintenance
Quick and easy installation
Step 1: Choose the ground
The cabin must be placed on a rigid base (minimum 2 cm thick wooden planks or concrete). Position the wall with the door (wall A).
Step 2: Lay the four walls
Insert the right and left angles, taking care not to swap them.
Connect the left wall (wall B) to wall A and insert the joint from top to bottom.
Once the walls are assembled, the handle is inserted into the door. Installation is simple (paper instructions are supplied) (follow the instructions enclosed with the door).
Step 3: Anchor the base
The brackets must be placed against the wall.
Step 4: Fix to the floor
Position the side supports for the seat and then insert the material to be used as a floor in the cabin. The cabin walls and floor support the bench supports. Place the bench top on the supports.
Step 5: Install the accessories
a) Pegs: can be fixed to the left or right wall. Drill two holes on the chosen wall and fasten two bolts (ø6×70 stainless steel).
b) The mirror: supplied with a hook, install it at the height you require.
Step 6: Install the roof panels
It is a single panel with 2 fixing bars. Place the roof on the cabin, ensuring that the L-profiles remain inside the 4 walls.
Step 7: Interior mounting
This is done with steel L-flanges. An average of 2 per wall is recommended.
3.500,00€
En stock
Secure payment
Free of charge – By credit card – Up to €6,000
- Cabin delivered as a kit
- Roof type: flat with a slope
- 1 mirror
- 1 PVC step
- 1 coat hook
- 1 small bench
FIXING
All cabins are supplied with a stainless steel or aluminum support. One side of the bracket is fixed to the concrete or wooden base, and the other to the cabin wall. This fastening is the same for each cabin.
The brackets are located inside the cabin, under the footboard.
- Cabin delivered as a kit
- Roof type: flat with a slope
- 1 mirror
- 1 PVC step
- 1 coat hook
- 1 small bench
FIXING
All cabins are supplied with a stainless steel or aluminum support. One side of the bracket is fixed to the concrete or wooden base, and the other to the cabin wall. This fastening is the same for each cabin.
The brackets are located inside the cabin, under the footboard.
3.500,00€
En stock
Secure payment
Free of charge – By credit card – Up to €6,000